 |
 |
 |
 |
|
 |
 |
SAE J2735-Draft-Rev28 [issued: 11-10-08]
-
206 -
This is an SAE Motor Vehicle Council draft document of the DSRC committee, subject to change.
-- a two-way path or an outbound path is described
maneuverStraightAllowed (2) -- ('0000000000000010'B)
maneuverLeftAllowed (4) -- ('0000000000000100'B)
maneuverRightAllowed (8) -- ('0000000000001000'B)
yield (16) -- ('0000000000010000'B)
maneuverNoUTurn (32) -- ('0000000000100000'B)
maneuverNoTurnOnRed (64) -- ('0000000001000000'B)
maneuverNoStop (128) -- ('0000000010000000'B)
noStop (256) -- ('0000000100000000'B)
noTurnOnRed (512) -- ('0000001000000000'B)
hovLane (1024) -- ('0000010000000000'B)
busOnly (2048) -- ('0000100000000000'B)
busAndTaxiOnly (4096) -- ('0001000000000000'B)
maneuverHOVLane (8192) -- ('0010000000000000'B)
maneuverSharedLane (16384) -- ('0100000000000000'B)
-- a "TWLTL" (two way left turn lane)
maneuverBikeLane (32768) -- ('1000000000000000'B)
-- Issue: what about truck maneuvers etc..
</xs:appinfo>
<xs:documentation>
2 bytes
</xs:documentation>
</xs:annotation>
<xs:union>
<xs:simpleType>
<xs:restriction base="xs:unsignedInt">
<xs:minInclusive value="0"/>
<xs:maxInclusive value="32768"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="noData"/>
<xs:enumeration value="egressPath"/>
<xs:enumeration value="maneuverStraightAllowed"/>
<xs:enumeration value="maneuverLeftAllowed"/>
<xs:enumeration value="maneuverRightAllowed"/>
<xs:enumeration value="yield"/>
<xs:enumeration value="maneuverNoUTurn"/>
<xs:enumeration value="maneuverNoTurnOnRed"/>
<xs:enumeration value="maneuverNoStop"/>
<xs:enumeration value="noStop"/>
<xs:enumeration value="noTurnOnRed"/>
<xs:enumeration value="hovLane"/>
<xs:enumeration value="busOnly"/>
<xs:enumeration value="busAndTaxiOnly"/>
<xs:enumeration value="maneuverHOVLane"/>
<xs:enumeration value="maneuverSharedLane"/>
<xs:enumeration value="maneuverBikeLane"/>
</xs:restriction>
</xs:simpleType >
</xs:union>
</xs:simpleType>
Used By: This entry is directly used by the following 2 other data structures in this standard (record type,
descriptive name, ASN.1, and XML name (if present) of each):
DF
<XML>, and
DF
In addition, this item may be used by data structures in other ITS standards.
Remarks: If the VehicleLaneAttributes bit for egressPath is set, then the described path represents the out-
bound flow of traffic from the approach. In rare cases and for very small intersections, this bit may also
indicate bi-directional flow of traffic along the lane, although this is more often seen in other types of lanes
(such as when describing a pedestrian lane).