 |
 |
 |
 |
|
 |
 |
SAE J2735-Draft-Rev29 [issued: 12-11-08]
-
59 -
This is an SAE Motor Vehicle Council draft document of the DSRC committee, subject to change.
<xs:sequence>
<xs:element name="location" type="TireLocation"
minOccurs="0"/>
<xs:element name="pressure" type="TirePressure"
minOccurs="0"/>
<xs:element name="temp" type="TireTemp" minOccurs="0"/>
<xs:element name="wheelSensorStatus" type="WheelSensorStatus"
minOccurs="0"/>
<xs:element name="wheelEndElectFault"
type="WheelEndElectFault" minOccurs="0"/>
<xs:element name="leakageRate" type="TireLeakageRate"
minOccurs="0"/>
<xs:element name="detection"
type="TirePressureThresholdDetection" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- Vehicle Weight by axel -->
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="axle" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="16">
<xs:element name="axle-item" >
<xs:complexType>
<xs:sequence>
<xs:element name="location" type="AxleLocation"
minOccurs="0"/>
<xs:element name="weight" type="AxleWeight" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="trailerWeight" type="TrailerWeight" minOccurs="0"/>
<xs:element name="cargoWeight" type="CargoWeight" minOccurs="0"/>
<xs:element name="steeringAxleTemperature" type="SteeringAxleTemperature"
minOccurs="0"/>
<xs:element name="driveAxleLocation" type="DriveAxleLocation" minOccurs="0"/>
<xs:element name="driveAxleLiftAirPressure" type="DriveAxleLiftAirPressure"
minOccurs="0"/>
<xs:element name="driveAxleTemperature" type="DriveAxleTemperature"
minOccurs="0"/>
<xs:element name="driveAxleLubePressure" type="DriveAxleLubePressure"
minOccurs="0"/>
<xs:element name="steeringAxleLubePressure" type="SteeringAxleLubePressure"
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
Used By: This entry is used directly by one other data structure in this standard, a DF called
DF_VehicleStatus <ASN> <XML>. In addition, this item may be used by data structures in other ITS
standards.
6.27 Data Frame: DF_MovementState
Use: The MovementState data frame is used to convey various information about the current signal state
of a designated collection of one or more lanes of a common type. Note that lanes types supported include
both motorized vehicle lanes as well as pedestrian lanes and dedicated train and transit lanes. Of the
reported data elements, the time to change (the time remaining in the current state) is often the most of
value. Lanes with a common state (typically adjacent sets of lanes in an approach) in a signalized
intersection will have individual lane values such as total vehicle counts, summed. It is used in the SPAT
message to convey every movement in the approaches in a given intersections so that vehicles, when